Технологии Просеивания и Сепарации
Виброситa, грохоты, просеиватели и сепараторы
+7 (495) 988-86-38, +7 (916) 240-97-69
Технология Просеивания и Сепарации
SWECO - Виброситa, грохоты, просеиватели и сепараторы

 

Каталог запчастей

Вибрационный сепаратор (вибросито) 18" SWECO SEPARATOR

MODEL

 

 

450LS18S33

450LS18S53

450LS18S55

450LS18S333

450LS18S533

450LS18S553

450LS18S555

450LS18S3333

450LS18S5333

450LS18S33333

450LS18S103SC

 

Above models are equipped with one tangential discharge spout at each point of separation. Additional discharge spouts are available if required. Spring protection included

Above models are available with plastic, plexiglass or metal cover assemblies.

Above prices include a totally enclosed 1/4 HP standard motor, 3 phase, 50 cycle, 1450 RPM, standard IP 65 (DIN). See price list for standard motor voltages. For ATEX motors or units consult Sweco.

Above prices are F.O.T. shipping point Nivelles. Add 45,00 € for cardboard packing. Add 180 € for seaworthy packing.

Above prices do not include mounted screen cloth and anti blinding accessories such as self cleaning kit, ball tray, etc.

Above prices are subject to applicable taxes.

 

RECOMMENDED SPARE PARTS FOR
18" SWECO SEPARATOR

Part N°

 

1

V Over Center Clamp Ring Assembly

S18S81127

2

V Channel Gaskets White Santoprene

S18R81104

1

Center Tie down Assembly

S18S00942

8

Springs only

S18S00201

1

of each mesh screen assembly

ordered on your purchase order

 


ITEM

DESCRIPTION

PART N°

 

 

 

 

Base Assembly– without motor

The cable gland is always in galvanized steel

Spring Assembly

Spring only (8 required)

Spring spool (8 required)

Bolt for spring spool top & bottom

Nut for spring spool top and bottom

Spring protection

Lower Table Assembly

S18C00102

US18S00220

S18S00201

S18K00220

7176

4522

S18K80201

S18C80425

 

ITEM

DESCRIPTION

PART N°

 

 

 

 

Table Frames

3" Table Frame with one 2"x3" spout

5" Table Frame with one 3"x4" spout

10" Scalping Frame with one 4"x6" spout

Spacing Frames

3" Blank Spacing Frame

3" Spacing Frame with one 2"x3" spout

3" Distributing Frame with one 2"x3" spout

5" Blank Spacing Frame

5" Spacing Frame with one 3"x4" spout

5" Distributing Frame with one 3"x4" spout

S18S82910

S18S82950

S18S82800

S18S80301

S18S80300

S18S82315

S18S80501

S18S80500

S18S82515

 

ITEM

DESCRIPTION

Part N°

 

 

 

 

Covers

Metal Cover Assembly, includes cover with inlet spout,

one inspection opening, clamp ring assembly,

black neoprene channel gasket and bottom tension ring

Metal Cover only

Plastic Cover

Flat Plexiglas Cover only

Flat Plexiglas Cover Assembly

Flexible Spout Connectors

3 1/4 IDx8" Long – Black neoprene (for 3" Frame)

3 1/4 IDx8" Long - White neoprene (for 3" Frame)

3 1/4 IDx8" Long – Silicone (for 3" Frame)

3 1/4 IDx8" Long – Viton (for 3" Frame)

3 1/4 IDx8" Long – EPDM (for 3" Frame)

4" IDx8" Long – Black neoprene (for 5" Frame + cover)

4" IDx8" Long – White neoprene (for 5" Frame + cover)

4" IDx8" Long – Silicone (for 5" Frame + cover)

4" IDx8" Long – Viton (for 5" Frame + cover)

4" IDx8" Long – Electroconductive Neoprene

4" IDx12" Long – Polyurethane "long life"

4" IDx12" Long – EPDM (for 5” Frame + cover)

S18S81410 +S18S81300

S18S81410

S18K01906

S18K81411

S18K81400

S18N01904

S18W01904

S18X01904

S18V01904

S18E01904

S18N01905

S18W01905

S18X01905

S18V01905

S18U01905

S18PU01905

S18E01905

 

ITEM

DESCRIPTION

PART N°

 

 

 

 

V Over Clamp Ring Assembly (Quick Release)

V Over Clamp Ring Assembly (for table)

Clamp Ring Nut (long type) SS

V Over Center Clamp Ring Bolt

Clamp Ring Nut (long type) Brass

Channel Gaskets

V Channel Gasket - White Santoprene

V Channel Gasket - Black Neoprene

V Channel Gasket - White Neoprene

V Channel Gasket – Electroconductive Neoprene

V Channel Gasket – Silicone

V-Channel Gasket – Viton

V-Channel Gasket - EPDM

U Channel Gasket - Black Neoprene

U Channel Gasket - White Neoprene

U Channel Gasket – Silicone

Liquid Feed Bucket

S18S81127

S18S81126

103.273-D

S18S81121

103.273

S18R81104

S18N81104

S18W81104

S18U81104

S18X81104

S18V81104

S18E81104

S18N01103

S18W01103

S18X01103

S18S43001


ITEM

DESCRIPTION

PART N°

 

 

 

 


Center Tie-Down Assembly,includes screen cushion washers,

center tie-down washers, jam nuts

Screen Cushion Washer - White Neoprene

Screen Cushion Washer – Silicone

Screen Cushion Washer - EPDM

Screen Cushion Washer – Viton

Center Tie-Down Washer

Tie-Down Jam Nuts

Tension Rings

Bottom Tension Ring

Top Tension Ring

Bolt Mounted Tension Ring Without Cloth

Tool kit

S18S00942

S30W00921

S30X00921

S30E00921

S30V00921

S30D00922

4632

S18S01021

S18S01022

Consult Sweco

111201


ITEM

DESCRIPTION

PART N°

 

 

 

 

Motor Weight Parts

Top Motor Weight Assembly

Top Motor Weight Plate

Bottom Motor Weight Assembly

Bottom Motor Weight Plate

Indicator Washer Assembly

Self Cleaning Kitwithout sliders (65 required)

Polyethylene Slider – height 16 mm

Polyester Slider

Polyurethane Slider (FDA)

White Nylon Slider (Conical)

Teflon slider – height 16mm (250°C – 280°C)

Self Cleaning Perforated Plate only

Spacer

Noise Abating Perforated Plate

S18C00721

S18C00729

S18C00731

S18C00737

S18C00745

S18S01044

S18K01015

S18K01031

S18K01066

S18K01018

S18T01015

S18S01046

S18S01047

S18Q01046



ITEM

DESCRIPTION

PART N°

 

 

 

 

Ball Tray Assembly, including 1 1/2" spacing frame, extension tie-down assembly, clamp ring assembly, gasket black neoprene, Supertaut screen assembly with stainless steel cloth on stainless steel ring (balls not included - 20 required)

White neoprene ball

Silicone ball

Electroconductive neoprene ball

1 1/2" Blank Spacing Frame

Ball Tray tie-down Assembly

Spray System Assembly

Deublin Union

Rotary Brush Assembly

Rotary Brush Assembly (light model)

Rotary Scraper Assembly

S18S81599

S48K01607

S48K01606

S48U01607

S18S81602

S18S01620

S18S01976

102289

S18S01985

S18SRotary

S18S41775

 

ITEM

DESCRIPTION

PART N°

 

 

 

 

Motors 1/4 HP (0,18 KW), 3 Ph, 50 cy, 1450 RPM

Standard Motors (TENV) – IP55 (DIN)- Tropicalized

- 220-240 / 380-415 Volt

- 500 Volt

- Other motor voltages/frequencies/rotations available on special request

Motors for hazardous locations – ¼ HP according ATEX -

- 220-240/380-415 Volt – Gas Zone 1, 2 – II2G EexdIIBT4

- 220 or 240 or 380 or 415 Volt (one tension only) – Dust (including PTC) zone 21,22 – II2D EexdIIBT135°C

- Other motor voltages/frequencies/rotations available on special request

For tropicalized motors : add 10 % on motor basis price

For complete assembled motorwith weight assemblies, plates and indicator washer add to corresponding motor price :

S18E00750

S18E00710

S18E00730G

S18E00730D

S18C00700

Вибрационный сепаратор (вибросито) 24” SWECO SEPARATOR

MODEL

 

 

600LS24S54

600LS24S544

600LS24S5444

600LS24S54444

600LS24S84SC

 

Above models are equipped with one tangential discharge spout at each point of separation. Additional discharge spouts are available if required. Spring protection included.

Above models are available with plastic, plexiglass or metal cover assemblies.

Above prices include a totally enclosed 1/3 HP standard motor, 3 phase, 50 cycle, 1450 RPM, standard IP 55 (DIN). See price list for standard motor voltages. For ATEX motors or units, consult Sweco.

Above prices are F.O.T. shipping point Nivelles. Add 70,00 € for cardboard packing. Add 245 € for seaworthy packing.

Above prices do not include mounted screen cloth and anti blinding accessories such as self cleaning kit, ball tray, etc.

Above prices are subject to applicable taxes.

 

RECOMMENDED SPARE PARTS FOR
24” SWECO SEPARATOR

Part N°

 

 

1

V Over Center Clamp Ring Assembly

S24S81124

2

V Channel Gaskets White Santoprene

S24R81104

1

Center Tie down Assembly

S18S00942

12

Springs only

S30S00201

1

of each mesh screen assembly

ordered on your purchase order

 

ITEM

DESCRIPTION

PART N°

 

 

 

 

Base Assembly- without motor

The cable gland is always in galvanized steel

Spring Assembly(Current design)

(Former design)

Spring only (12 required)

Spring spool (24 required)

Bolt for spring spool top

Bolt for spring spool bottom

Nut for spring spool top & bottom

Spring protection

Lower Table Assembly

S24C00101

US30S00200

S30S00200

S30S00201

S30K00220

7176

7532

4522

S30K80201

S24C80400

 


ITEM

DESCRIPTION

PART N°

 

 

Table Frames

5” Table Frame with one 3”x6” spout

8” Scalper Frame with one 3” x 6” Dbl Tgl spout

Spacing Frames

4” Blank Spacing Frame

4” Spacing Frame with one 3”x 6” spout

4” Distributing Frame with one 3”x 6” spout

5” Blank Spacing Frame (skirt)

5” Spacing Frame with one 3”x 6” spout

5” Distributing Frame with one 3”x 6” spout

S24S02510

S24S80881

S24S02401

S24S02400

S24S03405

S24S02501

S24S02500

S24S03505

 




ITEM

DESCRIPTION

PART N°

 

 

 

Covers

Metal Cover Assembly, includes cover with inlet spout, one inspection opening, clamp ring assembly, channel gasket

black neoprene and bottom tension ring

Metal Cover only

Plastic Cover

Flat Plexiglas Cover only

Flat Plexiglas Cover Assembly

Flexible Spout Connectors

6” ID x 12” Long - Black Neoprene

6” ID x 12” Long - White Neoprene

6” ID x 12” Long – Silicone

6” ID x 12” Long – Viton

6” ID x 12” Long – Electroconductive Neoprene

6” ID x 12” Long – Polyurethane “Long Life”

6” ID x 12” Long – EPDM

S24S81410

+ S24S81300

S24S81410

S24K01906

S24K81411

S24K81400

S30N01904

S30W01904

S30X01904

S30V01904

S30U01904

S30PU01904

S30E01904

 

ITEM

DESCRIPTION

PART N°

 

 

V Over Clamp Ring Assembly (Quick Release)

V Over Center Clamp Ring T Bolt

V Clamp Ring Nut (long type) Brass for quick release

V Over Clamp Ring Assembly (Quick Release)

V Over Center Clamp Ring T Bolt

V Clamp Ring Nut Brass for quick release

V Over Clamp Ring Assembly (for table)

V Clamp Ring Nut (long type) Brass

V Over Clamp Ring Assembly (for table)

V Clamp Ring Nut (long type) Brass

S24S81124

S48S81121

103.271

S24S81120

S18S81121

103.273

S24S81126

103.271

S24S81128

103.273


Channel Gaskets

V Channel Gasket - White Santoprene

V Channel Gasket - Black Neoprene

V Channel Gasket - White Neoprene

V Channel Gasket - Electroconductive Neoprene (black)

V Channel Gasket – Silicone

V Channel Gasket – Silicone (For Thin Lip ring)

V Channel Gasket – Viton

V Channel Gasket - EPDM

S24R81104

S24N81104

S24W81104

S24U81104

S24X81104

S24X11104

S24V81104

S24E81104


Center Tie Down Assembly, includes screen cushion

washers, center tie down washers, jam nuts

Screen Cushion Washer – White Neoprene

Screen Cushion Washer – Silicone

Screen Cushion Washer – Viton

Screen Cushion Washer - EPDM

Center Tie Down Washer

Tie Down Jam nuts

Tension Rings

Bottom Tension Ring

Bottom Tension Ring Thin Lip (continuous welds)

Top Tension Ring

Bolt mounted Tension Ring Assembly without Cloth

Motor Weight Parts

Top Motor Weight

Top Motor Weight Plate

Bottom Motor Weight

Bottom Weight Plate

Indicator Washer

Grease Gun Assembly

Grease Cartridge Castrol Longtime PD2

Grease Cartridge Jax Poly-Guard FG-2 FDA

S18S00942

S30W00921

S30X00921

S30V00921

S30E00921

S30D00922

4632

S24S01021

S24S11076

S24S01022

Consult Sweco

S24C00730

S18C00729

S24C00735

S18C00737

S18C00745

S48K01944

S48K02020

00-1753

 

ITEM

DESCRIPTION

PART N°

 

 

Self Cleaning Kitwithout sliders (130required)

Polyethylene Slider – height 16 mm

Polyurethane Slider (FDA)

White nylon slider

Self Cleaning Perforated Plate only

Spacer

Screen support for sliders

Noise Abating Perforated Plate

Ball Tray Assembly, including 1 ½” spacing frame, extension tie down assembly, clamp ring assembly, gasket black neoprene, Supertaut screen assembly with stainless steel cloth on stainless steel rings (balls not included, 25 required)

White Neoprene Ball

Silicone Ball

Electroconductive Neoprene Ball

1 ½” Blank Spacing Frame

Ball Tray Tie Down Assembly

Rotary Spray System Assembly

Deublin Union

Rotary Brush Assembly

Rotary Brush Assembly (light model)

Rotary Scraper Assembly

S24S01044

S18K01015

S18K01066

S18K01018

S24S01046

S18S01047

S24S01045MG008

S24Q01046

S24S81599

S48K01607

S48K01606

S48U01607

S24S01602

S30S01620

S24S01976

102289

S24S01985

S24SRotary

S24S41775

 

TEM

DESCRIPTION

PART N°

 

 

Motors 1/3 HP (0,25 Kw), 3 Ph, 50 Cy, 1450 RPM

Standard Motors (TENV) - IP 55 (DIN) – Tropicalized

- 220-240 / 380 - 415 Volt

- 500 Volt

Other motor voltages/frequencies/rotations available on special request

Motors for hazardous locations -1/3 HP according ATEX -

- 220-240/380-415 Volt – Gas Zone 1, 2 – II2G EexdIIBT4

- 220 or 240 or 380 or 415 Volt (one tension only) – Dust (including PTC) Zone 21,22 – II2D EexdIIBT135°C

Other motor voltages/frequencies/rotations available on special request

For tropicalized motors : add 10 % on motor basis price

For complete assembled motorwith weight assemblies, plates and indicator washer assembly,add to corresponding motor price :

S24E00750

S24E00712

Consult Sweco

Consult Sweco

S24C00700

 

Вибрационный сепаратор (вибросито) 30" SWECO SEPARATOR

MODEL

 

800LS30S66

 

800LS30S666

 

800LS30S6666

 

800LS30S86 Scalper

 

800LS30S6126DS

 

 

Above models are equipped with one tangential discharge spout at each point of separation. Additional discharge spouts are available if required. Spring protection and skirt included.

Above models are available with plastic, plexiglass or metal cover assemblies.

Above prices include a totally enclosed 1/2 HP standard motor, 3 phase, 50 cycle, 1450 RPM, standard IP 55 (DIN). See price list for standard motor voltages. For ATEX motors or units, consult Sweco.

Above prices are F.O.T. shipping point Nivelles. Add 90 € for cardboard packing. Add 350 € for seaworthy packing.

Above prices do not include mounted screen cloth and anti blinding accessories such as self cleaning kit, ball tray, etc.

Above prices are subject to applicable taxes.

 

RECOMMENDED SPARE PARTS FOR 30" SWECO SEPARATOR

Part

 

 

1

V Over Center Clamp Ring Assembly

S30S81112

2

V Channel Gaskets White Santoprene

S30R11104

1

Center Tie down Assembly

S30S00942

12

Springs only

S30S00201

1

of each mesh screen assembly

ordered on your purchase order

 

ITEM

DESCRIPTION

PART N°

 

 

Base Assembly- without motor

The cable gland is always in galvanized steel

Spring Assembly(Current design)

(Former design)

Spring only (12 required)

Spring spool (24 required)

Bolt for spring spool top

Bolt for spring spool bottom

Nut for spring spool top & bottom

Spring protection

Lower Table Assembly

S30C00101

US30S00200

S30S00200

S30S00201

S30K00220

7176

7532

4522

S30K80201

S30C80402

 

ITEM

DESCRIPTION

PART N°

 

 

Table Frames

6" Table Frame with one 4" x 6" spout

4" Table Frame with one 2.5" x 6" spout

8" Scalping Frame with one 4" x 8" spout

Spacing Frames

6" Blank Spacing Frame (skirt)

6" Spacing Frame with one 4" x 6" spout

6" Distributing Frame with one 4" x 6" spout, two inspection openings

4" Blank Spacing Frame

4" Spacing Frame with one 2.5" x 6" spout

4" Distributing Frame with one 2.5" x 6" spout

If 4" frame(s) required instead of 6" height,deductprice difference

S30S82900

S30S82950

S30S80880

S30S80601

S30S80600

S30S82615

S30S80501

S30S80500

S30S82515

 

ITEM

DESCRIPTION

PART N°

 

 

Liquid Feed Bucket

Covers

Metal Cover Assembly, includes cover with inlet spout, one inspection opening, clamp ring assembly, channel gasket black neoprene and bottom tension ring

Metal Cover only

Plastic Cover

Flat Plexiglas Cover only

Flat Plexiglas Cover Assembly

Inspection Opening Assembly(oval), including sleeve, cover plate and gasket, for 6" frame only

Inspection Opening Assembly(round 4”), including sleeve, cover plate and gasket, for 6" frame only

Inspection Cover White Neoprene 6”

Inspection Cover White Neoprene 4”

S30S43001

S30S81410

+ S30S81300

S30S81410

S30K01906

S30K81411

S30K81400

S48S00525

S30S00825

S48W00827

S48W00832

 

ITEM

DESCRIPTION

PART N°

 

 

Spouts, installed at factory

2.5" x 6" spout

4" x 6" spout

4" x 6" x 10" oversize spout

If oversize or non standard spout(s) are required,addthis price to list price of same frame with one spout

Flexible Spout Connectors

6" ID x 12" Long - Black Neoprene

6" ID x 12" Long - White Neoprene

6" ID x 12" Long – Silicone

6" ID x 12" Long – Electroconductive Neoprene (black)

6" ID x 12" Long - Polyurethane "long life"

6" ID x 12" Long – Viton

6" ID x 12" Long – EPDM

6" ID x 12" Long – Silicon translucid (FDA)

6" ID x 1/8" Straight flexible white neoprene/per meter

6" ID x 10" Long – White gum (FDA)

6" ID x 12" Long – Straightflex gum rubber (FDA)

S30S00510

S30S00610

S30S00657

S30N01904

S30W01904

S30X01904

S30U01904

S30PU01904

S30V01904

S30E01904

S30X01904T

18024

18039

10-813-012

 

ITEM

DESCRIPTION

PART N°

 

 

V Clamp Ring Assembly (new type)

Clamp Ring Bolt assembly-long, hex head

Clamp Ring Nut (long )

Clamp Ring Bolt (std with hex head)

Clamp Ring Washer

V Cl. Ring Assembly (old type-on request)

Clamp Ring Bolt assembly – T type

Clamp ring bolt (T type)

Clamp ring nut (long)

U Clamp Ring Assembly

V Clamp Ring Quick Release

S30S81112

S48S91121

103271

S48S01121

4110

S30S81132

S48S91131

S48S01131

103.271

S30S01105

S30S81124

 

ITEM

DESCRIPTION

PART N°

 

 

Channel Gaskets (Thin lip design)

V Channel Gasket TL - white santoprene

V Channel Gasket TL - white neoprene

V Channel Gasket TL - electroconductive neoprene

V Channel Gasket TL – silicone

V Channel Gasket TL - EPDM

Other material and profile on request

Channel Gaskets (former design)

V Channel Gasket - white santoprene

V Channel Gasket - black neoprene

V Channel Gasket - white neoprene

V Channel Gasket - silicone

V Channel Gasket – viton

V Channel Gasket - EPDM

U Channel Gasket - black neoprene

U Channel Gasket - white neoprene

U Channel Gasket - silicone

S30R11104

S30W11104

S30U11104

S30X11104

S30E11104

S30R81104

S30N81104

S30W81104

S30X81104

S30V81104

S30E81104

S30N01103

S30W01103

S30X01103

 

ITEM

DESCRIPTION

PART N°

 

 


Center Tie Down Assembly, includes screen cushion washer, center tie down washer, jam nuts

Screen cushion washer - white neoprene

Screen cushion washer - silicone

Screen cushion washer - viton

Screen cushion washer - EPDM

Center tie-down washer

Tie-down jam nuts

Tension Rings

Bottom Tension Ring (Thin Lip)

Bottom Tension Ring (Lap Ring)

Bottom Tension Ring (box ring)

Top Tension Ring

Bolt mounted tension ring without cloth

S30S00942

S30W00921

S30X00921

S30V00921

S30E00921

S30D00922

4632

S30S11085

S30S01021

S30S01085

S30S01022

Consult Sweco

 

ITEM

DESCRIPTION

PART N°

 

 

Motor Weight Parts

Top motor weight assembly

Top motor weight plate

Bottom motor weight assembly

Bottom motor weight plate

Indicator washer assembly

Motor wedge (old design of motor fitting)

1”NC Thrd STL slotted hex nut

Grease Gun Assembly

Grease cartridge Castrol Longtime PD2

Grease cartridge Jax Poly-Guard FG-2 FDA

Tool Kit– Long Socket

S30C00757

S30C00729

S30C00731

S30C00737

S30C00745

S30C01902

103114

S48K01944

S48K02020

00-1753

111203

 

ITEM

DESCRIPTION

PART N°

 

 

Self Cleaning Kitwithout sliders (75 required)

Polypropylene slider - height 26 mm (for Thin Lip)

Polyester slider – height 26 mm (for Thin Lip)

Polyurethane slider – height 26 mm (for Thin Lip)

Nylon slider – height 26 mm (for Thin Lip)

Polyethylene slider - height 21 mm (for sandwich screens)

Polyester slider - height 21 mm (for sandwich screens)

Polyurethane slider - height 21 mm (for sandwich screens)

White Nylon slider - height 21 mm (for sandwich screens)

White Nylon slider - height 21 mm (for sandwich screens) - High Temperature

Polyethylene slider - height 24 mm (for box ring)

Polyester slider - height 24 mm (for box ring) FDA

Polyurethane slider - height 24 mm (for box ring)

White Nylon slider - height 24 mm (for box ring)

White Nylon slider - height 24 mm – High Temperature

Self cleaning perforated plate only

Spacer – 21 mm (Thin Lip)

Spacer – 19 mm (box ring)

Screen support for sliders

Noise Abating Perforated Plate

S30S01044

S48K11130

S48K11131

S48K11119

S48K11114

S48K01017

S48K01031

S48K01019

S48K01014

S48K01018

S48K01015

S48K21031

S48K01019H

S48K01014H

S48K21018

S30S01046

S30S11047

S30S01047

S30S01045MG008

S30Q01046

 

ITEM

DESCRIPTION

PART N°

 

 

Ball Tray Assembly, including 1 1/2" spacing frame, extension tie-down assembly, clamp ring assembly, gasket black neoprene, Supertaut screen assembly with stainless steel cloth on stainless steel rings (balls not included, 40 required)

White neoprene ball

Silicone ball

Electroconductive neoprene ball

1 1/2" Blank Spacing Frame

Ball Tray tie-down assembly

Rotary Spray System Assembly

Deublin Union

Rotary Brush Assembly

Rotary Brush Assembly (light model)

Rotary Scraper Assembly

S30S81599

S48K01607

S48K01606

S48U01607

S30S81602

S30S01620

S30S01976

102.289

S30S01985

S30SRotary


S30S41775

 

ITEM

DESCRIPTION

PART N°

 

 

Motors 1/2 HP (0,37 Kw), 3 Ph., 50 Cy, 1450 RPM

Standard Motors (TENV) - IP 55 – Tropicalised

- 220-240 / 380-415 Volt

- 500 Volt

Other motor voltages/frequencies/rotations available on special request

Motors for hazardous locations – ½ HP according ATEX - 1450 RPM

- 220-240/380-415 Volt – Gas Zone 1, 2 – II2G EexdIIBT4

- 220 or 240 or 380 or 415 Volt (one tension only) – Dust (including PTC) Zone 21,22 – II2D EexdIIBT135°C

For tropicalized motors : add 10 % on motor basis price

Other motor voltages/frequencies/rotations available on special request

For complete Assembled Motorwith weight assemblies, plates and indicator washer assembly,add to corresponding motor price :

S30E00750

S30E00714

Consult Sweco

Consult Sweco

S30C00700

Вибрационный сепаратор (вибросито) ZS 40" SWECO SEPARATOR

1/2 HP MOTOR

MODEL

 

 

1000ZS40C66

1000ZS40C666

1000ZS40C88

1000ZS40CS888

1000ZS40C126SC

 

Above models are equipped with one tangential discharge spout at each point of separation. Additional discharge spouts are available if required.

Spring protection and skirt included.

Above models are available with plastic, plexiglass or metal cover assemblies.

Above prices include a totally enclosed 1/2 HP standard motor, 3 phase, 50 cycle, 1450 RPM, standard IP 55 (DIN). See price list for standard motor voltages. For ATEX motors or units, consult Sweco.

Above prices are F.O.T. shipping point Nivelles. Add 120 € for cardboard packing. Add 470 € for seaworthy packing.

Above prices do not include mounted screen cloth and anti blinding accessories such as self cleaning kit, ball tray, etc.

Above prices are subject to applicable taxes.

NOTE : When stainless steel is specified, substitute "S" in place of C after 1000ZC40.


RECOMMENDED SPARE PARTS FOR
ZS40" SWECO SEPARATOR

Part N°

 

 

1

V Over Center Clamp Ring Assembly

S40S81105

2

V Channel Gaskets White Santoprene

Thin Lip

S40W11104

1

No Tool Center Tie down

S48K00980E

8

Springs only

S48S00201

2

of each mesh screen assembly

Ordered on your purchase order

 

ITEM

DESCRIPTION

PART N°

 

 

Base Assembly- without motor

Spring Assembly(CS spring spools)

Spring only (8 required)

Spring spool (16 required)

Spring Protection

Lower Table Weldment

Table Tray Gasket, EPDM

Table Frames

6" Table Frame with one 3" x 8" spout

8" Table Frame with one 6" x 8" spout

12" Scalping Frame with one 10" round spout

Spacing Frames

6” Blank Spacing Frame

8" Blank Spacing Frame

6" Spacing Frame with one 3" x 8" spout

8" Spacing Frame with one 6" x 8" spout

6" Distributing Frame with one 3" x 8" spout, two inspection openings

8" Distributing Frame with one 6" x 8" spout, two inspection openings

US40C00101

US48S00200

S48S00201

S48K00220

S48K80201

S40C80402

S40E81130

S40C82910

S40C82950

S40C81580

S40S80601

S40S80801

S40C80600

S40C80800

S40C82615

S40C82815

 

ITEM

DESCRIPTION

PART N°

 

 

Covers

Metal Cover Assembly, includes cover with inlet spout, one inspection opening, clamp ring assembly, channel gasket black neoprene and bottom tension ring

Metal Cover only

Flat Lexan Cover only

Flat Lexan Cover Assembly

Inspection Cover White Neoprene 6”

Flexible Spout Connectors

8" ID x 12" Long - Black Neoprene

8” ID x 12” Long - White Neoprene

8" ID x 12" Long - Silicone

8" ID x 12" Long Polyester

8" ID x 12" Long - Polyurethane "long life"

8" ID x 12" -Long - Flex Sock Connetor

8" ID x 12" Long – Viton

8” ID x 12” Long – Electroconductive Neoprene

8” ID x 12” Long – EPDM

8” ID x 12” Long – FDA Electroconductive

8” ID x 12” Long – Translucent Silicone FDA

8” ID x 1/8” – Straightflex white neoprene/per meter

8” ID x 12” lg – Straightflex-silicone

8” ID x 1/8” – Straightflex gum rubber

S40C81410

+ S40C81300

S40C81410

S40L81411

S40K81400

S48W00827

S48N01904

S48W01904

S48X01904

S48P01904

S48PU01904

S48F01904

S48V01904

S48U01904

S48E01904

S48EF01904

S48X01904T

18021

18041

10-814-012

 

ITEM

DESCRIPTION

PART N°

 

 


V Over Center Clamp Ring Assembly

Clamp Ring Bolt assembly-long, hex head

Clamp Ring Bolt (std with hex head)

Clamp Ring Nut (long)

Clamp Ring Washer

Clamp Ring Assy Quick Release

Channel Gasket

V Channel Gasket – white Santoprene – Thin lip

V Channel Gasket - white TPE - Thin lip

V Channel Gasket – silicone – Thin lip

V Channel Gasket – EPDM – Thin lip

V Channel Gasket – electroconductive neoprene – Thin Lip

V Channel Gasket – white neoprene – box ring

Center Tie Down Assembly, includes screen cushion washers, center tie down washers , jam nuts

Screen cushion washer - White Neoprene

Screen cushion washer – Silicone

Screen cushion washer – Viton

Screen cushion washer - EPDM

Center tie down washer – SS

Center tie down jam nuts

No Tool Center Tie Down

S40S81105

S48S91121

S48S01121

103.271

4110

S40S81124

S40R11104

S40W11104

S40X11104

S40E11104

S40U11104

S40W81104

S48S00942

S48W00921

S48X00921

S48V00921

S48E00921

S48D00922

4334

S48K00980E

 

ITEM

DESCRIPTION

PART N°

 

 

Tension Rings

Bottom Tension Ring (Thin Lip)

Bottom Tension Ring (Box Ring)

Motor Weight Parts

Top motor weight assembly

Top motor weight plate

Bottom motor weight assembly

Bottom motor weight plate

Indicator washer assembly

Grease Gun Assembly

Grease Cartridge Castrol Longtime PD2

Tool Kit – Long Socket

S40S11085

S40S01085

S30C00721

S30C00729

S30C00731

S30C00737

S30C00745

S48K01944

S48K02020

111203



ITEM

DESCRIPTION

PART N°

 

 

Self Cleaning Kitwithout sliders (120 required)

Polypropylene slider - height 26 mm (for Thin Lip) ATEX appr

Polyester slider - height 26 mm (for Thin Lip)

Polyurethane slider - height 26 mm (for Thin Lip) ATEX appr

Nylon slider - height 26 mm (for Thin Lip)

Self cleaning perforated plate only

Spacer – 21 mm (Thin Lip)

Spacer – 19 mm (Box Ring)

Noise Abating Perforated Plate

Ball Tray Assembly, including 2" spacing frame, extension tie-down assembly, clamp ring assembly, gasket black neoprene, Supertaut screen assembly with stainless steel cloth on stainless steel rings (balls not included, 40 required)

White neoprene ball

Silicone ball

Electroconductive neoprene ball

2" Blank Spacing Frame

Ball Tray tie-down assembly

Rotary Brush Assembly (light model)

Rotary Spray System Assembly

S40S01045

S48K11130

S48K11131

S48K11119

S48K11114

S40S01046

S48S11047

S48S01047

S40Q01046

S40S81600

S48K01607

S48K01606

S48U01607

S40C81602

S48S01620

S40Srotary

S40S01976

ITEM

DESCRIPTION

PART N°

 

 

Motors 1/2 HP (0,37 Kw),, 3 Ph., 50 Cy, 1450 RPM

Standard Motors (TENV) - IP 55 (DIN) – Tropicalised

- 220-240 / 380-415 Volt

- 500 Volt

Other motor voltages/frequencies/rotations available on special request

Motors for hazardous locations - ½ HP according ATEX - 1450 RPM

- 220-240/380-415 Volt – Gas Zone 1, 2 – II2G EexdIIBT4

- 220 or 240 or 380 or 415 Volt (one tension only) – Dust (including PTC) Zone 21,22 – II2D EexdIIBT135°C

For tropicalized motors : add 10 % on motor basis price

Other motor voltages/frequencies/rotations available on special request

For complete Assembled Motorwith weight assemblies, plates and indicator washer assembly, add to corresponding motor price:

S30E00750

S30E00714

Consult Sweco

Consult Sweco

S40C00700

 

Вибрационный сепаратор (вибросито) XS40" SWECO SEPARATOR

2,5 HP MOTOR

MODEL

 

 

1000XS40C666

1000XS40C886

1000XS40C888

1000XS40C6666

1000XS40C8888

1000XS40C126SC

 

Above models are equipped with one tangential discharge spout at each point of separation. Additional discharge spouts are available if required.

Spring protection and skirt included.

Above models are available with plastic, plexiglass or metal cover assemblies.

Above prices include a totally enclosed 220-240/380-415 Volts 2,5 HP motor, 3 phase, 50 cycle, 1450 RPM, standard IP 65 (DIN). See page 65 extra prices for non standard motor voltages, ATEX motors.

Above prices are F.O.T. shipping point Nivelles. Add 120,00 € for cardboard packing. Add 470,00 € for seaworthy packing.

Above prices do not include mounted screen cloth and anti blinding accessories such as self cleaning kit, ball tray, etc.

Above prices are subject to applicable taxes.

NOTE : When stainless steel is specified, substitute "S" in place of C after 1000XS40.


RECOMMENDED SPARE PARTS FOR
XS40" SWECO SEPARATOR

Part N°

Unit Price

1

V Over Center Clamp Ring Assembly

S40S81105

2

V Channel Gaskets White Neoprene

S40W11104

1

No Tool Center Tie Down

S48K00980E

8

Springs only

S48S00201

2

of each mesh screen assembly

 

ITEM

DESCRIPTION

PART N°

 

 

Base Assembly- without motor

Spring Assembly(CS spring spools)

Spring only (8 required)

Spring spool (16 required)

Spring Protection

Lower Table Weldment

Table Frames

6" Table Frame with one 3" x 8" spout

8" Table Frame with one 6" x 8" spout

12" Scalping Frame with one 10" round spout

Spacing Frames

6” Blank Spacing Frame

8" Blank Spacing Frame

6" Spacing Frame with one 3" x 8" spout

8" Spacing Frame with one 6" x 8" spout

6" Distributing Frame with one 3" x 8" spout, two inspection openings

8" Distributing Frame with one 6" x 8" spout, two inspection openings

US40C00101

US48S00200

S48S00201

S48K00220

S48K80201

US40C80425

S40C82910

S40C82950

S40C81580

S40S80601

S40S80801

S40C80600

S40C80800

S40C82615

S40C82815

 

ITEM

DESCRIPTION

PART N°

 

 

Covers

Metal Cover Assembly, includes cover with inlet spout, one inspection opening, clamp ring assembly, channel gasket black neoprene and bottom tension ring

Metal Cover only

Flat Lexan Cover only

Flat Lexan Cover Assembly

Inspection Cover White Neoprene

Flexible Spout Connectors

8” ID x 12” Long - Black Neoprene

8" ID x 12" Long - White Neoprene

8" ID x 12" Long - Silicone

8" ID x 12" Long Polyester

8" ID x 12" Long - Polyurethane "long life"

8" ID x 12" -Long - Flex Sock Connector

8" ID x 12" Long - Viton

8” ID x 12” Long – Electroconductive Neoprene

8” ID x 12” Long – EPDM

8” ID x 12” Long – FDA Electroconductif

8” ID x 12” Long – Translucent Silicone FDA

8” ID x 1/8” – Straightflex white neoprene/per meter

8” ID x 12” lg – Straightflex-silicone

8” ID x 1/8” – Straightflex gum rubber

S40C81410

+ S40C81300

S40C81410

S40L81411

S40K81400

S48W00827

S48N01904

S48W01904

S48X01904

S48P01904

S48PU01904

S48F01904

S48V01904

S48U01904

S48E01904

S48EF01904

S48X01904T

18021

18041

10-814-012

 

ITEM

DESCRIPTION

PART N°

 

 


V Over Center Clamp Ring Assembly

Clamp ring Bolt assembly-long, hex head

Clamp Ring Bolt (std with hex head)

Clamp Ring Nut (long)

Clamp Ring Washer

V Clamp Ring Assy Quick Release

Channel Gasket

V Channel Gasket – white Santoprene Thin Lip

V Channel Gasket - white TPE- Thin Lip

V Channel Gasket – silicone – Thin Lip

V Channel Gasket – EPDM – Thin Lip

V Channel Gasket – electroconductive neoprene – Thin Lip

V Channel Gasket – white neoprene – Box Ring

Center Tie Down Assembly, includes screen cushion washer, center tie down washer, jam nuts

Screen cushion washer - White Neoprene

Screen cushion washer - Silicone

Screen cushion washer – Viton

Screen cushion washer - EPDM

Center tie down washer - SS

Center tie down jam nuts

No Tool Center Tie Down

S40S81105

S48S91121

S48S01121

103.271

4110

S40S81124

S40R11104

S40W11104

S40X11104

S40E11104

S40U11104

S40W81104

S48S00942

S48W00921

S48X00921

S48V00921

S48E00921

S48D00922

4334

S48K00980E

 

ITEM

DESCRIPTION

PART N°

 

 

Tension Rings

Bottom Tension Ring (Thin Lip)

Bottom Tension Ring (Box Ring)

Smart Lock Force Wheel

Top weight assembly metal

Bottom weight assembly metal

Grease Gun Assembly

Grease cartridge Castrol Longtime PD2

Grease cartridge Klueber Staburags NBU

Grease cartridge Jax Poly-Guard FG-2 FDA

Tool Kit – Long Socket

TechLube Kit Assembly for 2.5 HP motors
including lube hoses and 2 x 120 cc. Techlube Luber

Same for Italvibras motors (Klueber Staburags)

Techlube Luber (Castrol) 120 cc

Techlube Luber (Klueber Staburags) 120 cc



S40S11085

S40S01085

S60C01702

S60C01752

S48K01944

S48K02020

S30K01946

00-1753

111203

S48K25044-F1EU

S48K25044-F5EU

S48K42030-F1

S48K42030-F5

 

ITEM

DESCRIPTION

PART N°

 

 

Self Cleaning Kitwithout sliders (120 required)

Polypropylene slider - height 26 mm (for Thin Lip) ATEX appr

Polyester slider - height 26 mm (for Thin Lip)

Polyurethane slider- height 26 mm (for Thin Lip) ATEX appr

White Nylon slider - height 26 mm (for Thin Lip)

Self cleaning perforated plate only

Spacer – 21 mm (Thin Lip)

Spacer –19 mm (Box Ring)

Screen support for sliders

Noise Abating Perforated Plate

Ball Tray Assembly, including 2" spacing frame, extension tie-down assembly, clamp ring assembly, gasket black neoprene, Supertaut screen assembly with stainless steel cloth (balls not included, 40 required)

White neoprene ball

Silicone ball

Electroconductive neoprene ball

2" Blank Spacing Frame

Ball Tray tie-down assembly

Rotary Brush Assembly (light model)

Rotary Spray System Assembly

S40S01045

S48K11130

S48K11131

S48K11119

S48K11114

S40S01046

S48S11047

S48S01047

S40S01045MG008

S40Q01046

S40S81600

S48K01607

S48K01606

S48U01607

S40C81602

S48S01620

S40Srotary

S40S01976

 

ITEM

DESCRIPTION

PART N°

 

 

Motors 2,5 HP (1,8 Kw), 3 Ph., 50 Cy, 1450 RPM

Standard Motors (TENV) - IP 65 (DIN) – Tropicalised

- 220-240 / 380-415 Volt

- 500 Volt

- 400 / 690 Volt

Motors for hazardous locations 2,5 HP according ATEX – Tropicalised

- 220-240 / 380-415 Volt – Gas Zone 1, 2 – II2G EexdIIBT4

- 220 or 240 or 380 or 415 Volt (one tension only)– Dust (including PTC) Zone 21, 22 – II2D EexdIIBT135°C

Other motor voltages/frequencies/rotations available on special request

For complete Assembled Motorwith metal weight assemblies (former metal weights), plates and indicator washer,add to corresponding motor price:

S48E01750

S48IV00750

S48E01712

S48E01733

S48E01730G

S48E01730D

LS48C00700

Вибрационный сепаратор (вибросито) 48” SWECO SEPARATOR

MODEL

 

 

1200US48C66

1200US48C68

1200US48C86

1200US48C88

1200US48C666

1200US48C686

1200US48C688

1200US48C866

1200US48C886

1200US48C888

1200US48C6666

1200US48C6886

1200US48C8666

1200US48C8886

1200US48C66666

1200US48C86666

1200US48C156 Scalper

R48C80000 Flow Thru

1200US48C6146DS

 

With the exception of the Scalper units, above models are equipped with one tangential discharge spout at each point of separation. Additional discharge spouts are available if required.

Spring protection and skirt included.

See outline drawings for explanations of FT and Scalper Discharge Spouts.

Above models are available with plastic, plexiglass or metal cover assemblies.

Above prices :

includea totally enclosed 220-240/380-415 Volts 2,5 HP motor, 3 phase, 50 cycle, 1450 RPM, standard IP 65 (DIN); see page 79 extra prices for non standard motor voltages, ATEX motors.

are F.O.T. shipping point Nivelles. Add 120,00 € for cardboard packing. Add 470,00 € for seaworthy packing

do not includemounted screen cloth and anti blinding accessories such as self cleaning kit, ball tray, etc.

are subject to applicable taxes.

NOTE : When stainless steel is specified, substitute “S” in place of “C” after 1200US48 in model number.

RECOMMENDED SPARE PARTS FOR
48” SWECO SEPARATOR

Part N°

 

1

V Clamp Ring Assembly

S48S81112

2

V Channel Gaskets White Santoprene

S48R11104

1

No Tool Center Tie Down

S48K00980E

12

Springs only

S48S00201

1

of each mesh screen assembly

ordered on your purchase order

 

ITEM

DESCRIPTION

PART N°

 

 

Base Assembly without motor

The cable gland is always in galvanized steel

LS to US conversion kit, includes lower table, motor wedges, spring, spring spools

Spring Assembly(current design – CS spring spool)

Spring spool (24 required)

Spring only (12 required)

Bolt for spring spool top

Bolt for spring spool bottom

Nut for spring spool top and bottom

Spring Protection

Balance Spring Assembly

US Lower Table Assembly, including lower table tray,

motor casing assembly, table skirt ring, table gussets

Motor mounting ring is always in carbon steel, not available in stainless steel

L

US48C00101

S48C80052

US48S00200

S48K00220

S48S00201

7190

7588

4644

S48K80201

S48S01910

US48C80425

 

ITEM

DESCRIPTION

PART N°

 

 

Table Frames

6” Table Frame with one 3” x 8” spout

6” Table Frame with one 3” x 8” x 16” oversize spout

8” Table Frame with one 6” x 8” spout

8” Table Frame with two 6” x 8” spouts

8” Table Frame with one 6” x 8” x 16” oversize spout

15” Scalper Frame with one 8” x 8” x 16” spout

Spacing Frames

6” Blank Frame

6” Spacing Frame with one 3” x 8” spout

6” Spacing Frame with one 3” x 8” x 16” oversize spout

6” Distributing Frame with one 3” x 8” spout, 2 inspection openings

S48C82910

S48C82930

S48C82955

S48C82960

S48C82970

S48C81580

S48C80601

S48C80600

S48C80655

S48C82620

 

ITEM

DESCRIPTION

PART N°

 

 

Spacing Frames (cont’ed)

8” Blank Frame

8” Spacing Frame with one 6” x 8” spout

8” Spacing Frame with two 6” x 8” spouts

8” Spacing Frame with one 6” x 8” x 16” oversize spout

8” Distributing Frame with one 6” x 8” spout, 2 inspection openings

10” Blank Spacing Frame

15” Blank Frame

15” Spacing Frame with one 6” x 8” spout

15” Spacing Frame with one 6” x 8” x 16” oversize spout

8” Spacing Frame with one 4” x 8” high capacity spout

8” Spacing Frame with two 4” x 8” high capacity spouts

8” Spacing Frame with one 4” x 8” x 16” high capacity spout

8” Spacing Frame with two 4” x 8” x 16” high capacity spouts

14” Double Screening Frame

S48C80801

S48C80800

S48C80840

S48C80855

S48C82815

S48C81001

S48C81501

S48C81500

S48C81555

S48C86800

S48C86810

S48C86820

S48C86830

S48C42572

 

ITEM

DESCRIPTION

PART N°

 

 

Liquid Feed Bucket

Canadian Velocity Reducer 0-189 l/min

Canadian Velocity Reducer 190-378 l/min

Canadian Velocity Reducer 379-568 l/min

Canadian Velocity Reducer 569-946 l/min

Covers

Metal Cover Assembly, includes cover with inlet spout, one inspection opening, clamp ring assembly, channel gasket black neoprene and bottom tension ring

Metal Cover only

Plastic Cover

Flat Plexiglas Cover only

Flat Plexiglas Cover assembly

Metal Cover Only + 3 sprays spheres

Metal Cover Only + liquid feed bucket welded

ABS Cover only

ABS Cover assembly

Inspection Openings

Round, for 6” frame only, with sleeve, plug

Round, for 8” frame only, with sleeve, cover plate and gasket

Inspection Cover White Neoprene 6”

S48S43001

S48S01844

S48S01845

S48S01846

S48S01847

S48C81410

+ S48C81300

S48C81410

S48K01906

S48K81411

S48K81400

S48S81410PI

S48S81410BMP

S48K81402

S48K81403

S30C00525

S48C00825

S48W00827

 

ITEM

DESCRIPTION

PART N°

 

 

Spouts installed at Factory

3” x 8” spout (for 6” frame only)

3” x 8” x 16” oversize spout (for 6” frame only)

6” x 8” spout

6” x 8” x 16” oversize spout

4” x 8” high capacity spout

4” x 8” x 16” oversize spout, high capacity

6” x 16” waterspout

If additional or non standard spout(s) are required on frames,addthis price to price of same frame with one standard spout

Flexible Spout Connectors

8” ID x 12” Long - Black Neoprene

8” ID x 12” Long - White Neoprene

8” ID x 12” Long – Silicone

8” ID x 12” Long – Translucent Silicone FDA

8” ID x 12” Long - Electroconductive Neoprene

8” ID x 12” Long – Viton

8” ID x 12” Long – Polyester

8” ID x 12” Long – Polyurethane “long life”

8” ID x 12” Long - Flexible Sock Connector

8” ID x 12” Long - EPDM

8” ID x 12” Long – FDA Electroconductive

8” x 16” ID x 12” Long – Black Neoprene

8” x 16” ID x 12” Long – White Neoprene

S48C00510

S48C04800

S48C00810

S48C04810

S48C04820

S48C04830

S48C03812

S48N01904

S48W01904

S48X01904

S48X01904T

S48U01904

S48V01904

S48P01904

S48PU01904

S48F01904

S48E01904

S48EF01904

S48N01905

S48W01905

 

ITEM

DESCRIPTION

PART N°

 

 

8” x 16” ID x 12” Long – Silicone

8” x 16” ID x 12” Long – Electroconductive Neoprene

8” x 16” ID x 12” Long – Viton

8” ID x 1/8” – Straightflex white neoprene/per meter

8” ID x 12” lg – Straightflex-silicone

8” ID x 1/8” – Straightflex gum rubber

V Heavy Duty Clamp Ring Assembly (new type)

Clamp Ring Bolt assembly-long, hex head

Clamp Ring Nut (long )

Clamp Ring Bolt (std with hex head)

Clamp Ring Washer

V Cl. Ring Assembly (old type-on request)

Clamp Ring Bolt assembly – T type

Clamp ring bolt (T type)

Clamp ring nut (long)

V Clamp Ring Assy Quick Release

Clamp Ring Bolt (T type – quick release)

V Clamp Ring Assy Heavy Duty

Clamp Ring Bolt assembly-long, hex head

U Clamp Ring Assembly

Clamp Ring Bolt assembly-long, hex head

V Channel Gaskets (Thin lip design)

V Channel Gasket TL – White Santoprene

V Channel Gasket TL – White Neoprene

S48X01905

S48U01905

S48V01905

18021

18041

10-814-012

S48S81112

S48S91121

103271

S48S01121

4110

S48S81132

S48S91131

S48S01131

103271

S48S81124

S48S81121

S48S81152

S48S91121

S48S01105

S48S91121

S48R11104

S48W11104

 

ITEM

DESCRIPTION

PART N°

 

 



V Channel Gasket TL – Electroconductive Neoprene

V Channel Gasket TL - EPDM

V Channel Gasket TL– Silicone

V Channel Gasket TL - Viton

Other material on request

V Channel Gaskets

V-Channel Gasket – White Santoprene

V Channel Gasket – Black Neoprene

V Channel Gasket – White Neoprene

V Channel Gasket – Silicone

V Channel Gasket – Viton

U Channel Gaskets

U Channel Gasket - Black Neoprene

U Channel Gasket - White Neoprene

U Channel Gasket – Silicone

Center Tie-Down Assembly,includes screen cushion washer, center tie-down washer, jam nuts

Screen cushion washer - white neoprene

Screen cushion washer – silicone

Screen cushion washer – viton

Screen cushion washer – EPDM

Center tie-down washer - SS

Center tie-down jam nuts

No Tool Center Tie-down

S48U11104

S48E11104

S48X11104

S48V11104

S48R81104

S48N81104

S48W81104

S48X81104

S48V81104

S48N01103

S48W01103

S48X01103

S48S00942

S48W00921

S48X00921

S48V00921

S48E00921

S48D00922

4334

S48K00980E

 

ITEM

DESCRIPTION

PART N°

 

 

Tension rings

Bottom Tension Ring (Thin Lip)

Bottom Tension Ring (Lap Ring)

Bottom Tension Ring (box ring)

Top tension ring

Bolt type tension ring without cloth

Smart Lock Force Wheel Parts

Top assembly metal

Bottom assembly metal

Metal Motor Weight Parts

Top motor weight assembly (short)

Additional top motor weight plate

Bottom motor weight assembly

Bottom motor weight plate

Indicator washer assembly

Motor wedge (US model)

Motor wedge (former US model)

S48S11085

S48S01021

S48S01085

S48S01022

Consult Sweco

S60C01702

S60C01752

S48C00721

S48C00729

S48C00731

S48C00737

S48C00745

H48C05502B

H48C05500

 

ITEM

DESCRIPTION

PART N°

 

 

Grease gun assembly(without grease)

Grease cartridge Castrol Longtime PD2

Grease cartriddge Klueber Staburags NBU

Grease cartridge Jax Poly-Guard FG-2 FDA

Lube hose (two required) (from casing to base)

Tool Kit

- with long socket

- with short socket

TechLube Kit Assembly for 2.5 HP motors

including lube hoses and 2 x 120 cc. Techlube Luber

Same for Italvibras motors (Klueber Staburags)

Techlube Luber (Castrol) 120 cc

Techlube Luber (Klueber Staburags) 120 cc



S48K01944

S48K02020

S30K01946

00-1753

113.095

111.203

111.202

S48K25044-F1EU

S48K25044-F5EU

S48K42030-F1

S48K42030-F5

 

ITEM

DESCRIPTION

PART N°

 

 

Self Cleaning Kitwithout sliders (200 required)

Polypropylene slider - height 26 mm (for Thin Lip) ATEX appr

Polyester slider - height 26 mm (for Thin Lip)

Polyurethane slider - height 26 mm (for Thin Lip) ATEX appr

White nylon slider - height 26 mm (for Thin Lip)

Teflon slider – height 26 mm (for Thin Lip)

Polyethylene slider – height 24 mm (for box ring)

Polyester slider - height 24 mm (for box ring) FDA

Polyurethane slider - height 24 mm (for box ring)

White nylon slider - height 24 mm (for box ring)

White nylon slider - height 24 mm - High Temperature

Teflon slider - height 24 mm (for box ring)

Spacer –21 mm (Thin Lip)

Spacer – 19 mm (box ring)

Self cleaning perforated plate only

Self cleaning kit “U” gasket Black Neoprene

Self cleaning kit “U” gasket White Neoprene

Screen support for sliders

Noise Abating Perforated Plate

S48S01044

S48K11130

S48K11131

S48K11119

S48K11114

S48T11015

S48K01015

S48K21031

S48K01019H

S48K01014H

S48K21018

S48T01015

S48S11047

S48S01047

S48S01046

H48N05023

H48W05023

S48S01045MG008

S48Q01046

 

ITEM

DESCRIPTION

PART N°

 

 

Ball Tray Assembly, including 1 ½” spacing frame,

extension tie-down assembly, clamp ring assembly,

gasket black neoprene, Supertaut screen assembly w/SS cloth on SS rings (balls not included - 65 required)

White neoprene ball

Silicone ball

Electroconductive neoprene ball

1 ½” blank spacing frame

Ball tray tie-down assembly

Flow-Thru - spare parts

Spring spool (polyurethane) insert SS

Top motor weight for F.T. model

Bottom motor weight for F.T. model including fan

Indicator washer assembly for F.T. model

Spray System Assembly

Deublin Union

Nozzle ¼” NPT

Rotary Brush Assembly

Rotary Brush Assembly (light model)

Scraper Assembly

S48C81599

S48K01607

S48K01606

S48U01607

S48C81602

S48S01620

S48K00220-S

H60C05412

H60C05405

H60C00745

S48S01976

102.289

102.220

S48S01985

S48Srotary

S48S41775

 

ITEM

DESCRIPTION

PART N°

 

 

Motors 2,5 HP (1,8 Kw), 3 Ph., 50 Cy, 1450 RPM

Standard Motors (TENV) - IP 65 (DIN) – Tropicalised

- 220-240 / 380-415 Volt

- 500 Volt

- 400/690 Volt

- 220-240 / 380-415 Volt - FDA Grease

Motors for hazardous locations – 2,5 HP according ATEX – Tropicalised

- 220-240/380-415 Volt – Gas Zone 1, 2 – II2G EexdIIBT4

- 220 or 240 or 380 or 415 Volt (one tension only) – Dust (including PTC) Zone 21,22 – II2D EexdIIBT135°C

- Motor for zones 1,2 and 21,22

Other motor voltages/frequencies/rotations available on special request

Complete assembled metal motor weight

S48E01750

S48IV00750

S48E01712

S48E01733

S48E01750-F4

S48E01730G

S48E01730D

Consult Sweco

LS48C00700

60” SWECO SEPARATOR

MODEL

 

 

1500US60C88

1500US60C108

1500US60C1010

1500US60C888

1500US60C8108

1500US60C10108

1500US60C8888

1500US60C81088

1500US60C810108

1500US60C188 Scalper

R60C80000 Flow Thru

1500US60C8148DS

 

With the exception of the Scalper units, above models are equipped with one tangential discharge spout at each point of separation. Additional discharge spouts are available if required. See outline drawings for explanation of FT and Scalper Discharge Spouts.

Spring protection and skirt included.

Above models are available with plastic or metal cover assemblies.

Above prices include a totally enclosed 220-240/380-415 Volts 2,5 HP motor, 3 phase, 50 cycle, 1450 RPM, standard IP 65 (DIN); see page 79 extra prices for non standard motor voltages, ATEX motors.

Above prices are F.O.T. shipping point Nivelles. Add 130,00 € for cardboard packing. Add 560,00 € for seaworthy packing.

Above prices do not include mounted screen cloth and anti blinding accessories such as self cleaning kit, ball tray, etc.

Above prices are subject to applicable taxes.

NOTE: When stainless steel is specified, substitute "S" in place of "C" after 1500US60 in model number.

Вибрационный сепаратор (вибросито) 60” SWECO SEPARATOR

MODEL

 

 

1500US60C1088 HD (Heavy Duty)

1500US60C10888 HD

1500US60C108888 HD

1500US60C1088888 HD

1500US60C10108 HD

1500US60C101010 HD

1500US60C1010108 HD

1500US60C10108 PF (Parallel Feed)

1500US60C1010108 PF

1500US60C1010148 PF (Scalper)

1500US60C101010108 PF

With the exception of the PF units, above models are equipped with one tangential discharge spout at each point of separation. Additional discharge spouts are available if required. See outline drawings for explanations of PF Discharge Spouts. Spring protection and skirt included.

Above models are available with plastic or metal cover assemblies.

Above prices include a totally enclosed 220-240/380-415 Volts 5 HP motor, 3 phase, 50 cycle, 1450 RPM, standard IP65 (DIN); see page 93 extra prices for non standard motor voltages, ATEX motors.

Above prices are F.O.T. shipping point Nivelles. Add 140,00 € for cardboard packing. Add 560,00 € for seaworthy packing.

Above prices do not include mounted screen cloth and anti blinding accessories such as self cleaning kit, ball tray, etc...except the PF unitswhich are equipped with the standard complete self cleaning kit(s) with polypropylene sliders.

Above prices are subject to applicable taxes

NOTE: When stainless steel is specified, substitute "S" in place of "C" after 1500US60 in model number.

 

RECOMMENDED SPARE PARTS FOR
60" SWECO SEPARATOR

STANDARD UNITS :

Part N°

Unit Price

1

V Over Center Clamp Ring Assembly

S60S81112

2

V Channel Gaskets White Santoprene

S60R11104

1

No Tool Center Tie Down

S48K00980E

12

Springs only

S60S00201

3

Balance Spring Assemblies

S60S01910

1

of each mesh screen assembly

Ordered on your purchase order

 

HEAVY DUTY OR PARALLEL FEED UNITS :

Part N°

 

 

1

V Heavy Duty Clamp Ring Assembly

S60S81112

2

V Channel Gaskets White Santoprene

S60R11104

1

No Tool Center Tie Down

S48K00980E

12

Springs only

S60S00201

1

of each mesh screen assembly

ordered on your purchase order

 

ITEM

DESCRIPTION

PART N°

 

 

Base Assembly without motor

Base Assembly without motor for HD & PF units

The cable gland is always in galvanized steel

LS to US conversion kit, includes lower table, motor wedges, spring, spring spools

Spring Assembly for HD & PF units (former design)

Spring Assembly for std, HD and PF units(current design)

Spring only – std, HD & PF units - (current design)

Spring heavy duty only (for HD & PF units)- former design

Spring spool – std, HD & PF units – (current design)

Spring spool for HD & PF – former design

Bolt for spring spool top

Bolt for spring spool bottom

Nut for spring spool top & bottom

Balance Spring Assembly

US60C00101

US60C00101HP

S60C80052

S60S00205

US60S00200

S60S00201

S60S00203

S48K00220

F10K43005

7190

7588

4644

S60S01910

 

ITEM

DESCRIPTION

PART N°

 

 

US Lower Table Assembly,including lower table tray, motor casing assembly, table skirt ring, table gussets

Lower Table Assembly for HD & PF units

(Motor mounting ring is always in carbon steel and not available in stainless steel)

Table Frames

8" Table frame with one 6" x 8" spout

10" Table frame with one 6" x 8" spout

15" Scalping frame with one 8" x 8" x 16" spout

18" Scalping frame with one 8" x 8" x 16" spout

10" Table frame with one 3 1/2" x 8" spout - HD

Lifting lug for 60” frames (each)

US60C80425

US60C80425HP

S60C82955

S60C82900

S60C81580

S60C81880

S60C82901

S60Sliftlug

 

ITEM

DESCRIPTION

PART N°

 

 

Spacing Frames

8" Blank frame

8" Spacing frame with one 6" x 8" spout

8" Spacing frame with two 6" x 8" spouts

8" Distributing frame with one 6" x 8" spout, 2 inspection openings

10" Blank frame

10" Spacing frame with one 6" x 8" spout

10" Distributing frame with one 6" x 8" spout, 2 inspection openings

10" Distributing frame with one 6" x 8" 16" spout, 2 inspection openings

10" Spacing frame with one 4" x 8" high capacity spout

10" Spacing frame with two 4" x 8" high capacity spouts

10" Spacing frame with one 4" x 8" x 16" high capacity spout

10" Spacing frame with two 4" x 8" x 16" high capacity spouts

15" Blank frame

15" Spacing frame with one 6" x 8" spout

15" Spacing frame with one 6" x 8" x 16" oversize spout

14" Double Screening Frame

S60C80801

S60C80800

S60C80840

S60C82815

S60C81001

S60C81000

S60C83015

S60C83076

S60C81094

S60C81095

S60C81096

S60C81097

S60C81501

S60C81500

S60C81555

S60C42572

 

ITEM

DESCRIPTION

PART N°

 

 

Covers

Metal cover assembly, includes cover with inlet spout, one inspection opening, clamp ring assembly, black neoprene channel gasket and bottom tension ring

Metal cover only

Plastic cover

Flat plexiglas cover only

Flat plexiglas cover assembly

Inspection Opening,round, 6" with sleeve, cover plate and gasket

Inspection Cover Black Neoprene, 6"

Spouts installed at Factory

6" x 8" spout

6" x 8" x 16" oversize spout

4" x 8" high capacity spout

4" x 8" x 16" oversize spout, high capacity

6" x 16" waterspout

If additional or non standard spout(s) are required on frames,addthis price to price of same frame with standard spout

S60C81410

+ S60C81300

S60C81410

S60K01906

S60K81411

S60K81400

S48C00825

S48N00827

S60C00810

S60C04810

S60C10081

S60C10075

S60C03812

 

ITEM

DESCRIPTION

PART N°

 

 

Flexible Spout Connectors

8” ID x 12” Long - Black Neoprene

8" ID x 12" Long - White Neoprene

8" ID x 12" Long – Silicone

8" ID x 12" Long - Electroconductive Neoprene

8" ID x 12" Long - Viton

8" ID x 12" Long - Polyester

8" ID x 12" Long - Polyurethane "long life"

8" ID x 12" Long - Flex Sock Connector

8" ID x 12" Long – EPDM

8” ID x 12” Long – FDA Electroconductive

8” ID x 12” Long – Translucent Silicone FDA

8" x 16" ID x 12" Long - Black Neoprene

8" x 16" ID x 12" Long - White Neoprene

8" x 16" ID x 12" Long – Silicone

8" x 16" ID x 12" Long - Electroconductive Neoprene

8" x 16" ID x 12" Long - Viton

8" ID for PF - Black Neoprene

8" ID for PF - White Neoprene

8” ID for PF – Silicone

8” ID x 1/8” – Straightflex white neoprene/per meter

8” ID x 12” lg – Straightflex-silicone

8” ID x 1/8” – Straightflex gum rubber

S48N01904

S48W01904

S48X01904

S48U01904

S48V01904

S48P01904

S48PU01904

S48F01904

S48E01904

S48EF01904

S48X01904T

S48N01905

S48W01905

S48X01905

S48U01905

S48V01905

S60N01952

S60W01952

S60X01952

18021

18041

10-814-012

 

ITEM

DESCRIPTION

PART N°

 

 

V Clamp Ring Assembly (new type)

Clamp ring bolt assembly – long, hex head

Clamp Ring Nut (long)

Clamp ring bolt (std with hex head)

Clamp ring washer

V Cl. Ring Assembly (old type-on request)

Clamp Ring Bolt assembly – T type

Clamp Ring Bolt (T type)

Clamp Ring Nut (long)

V Clamp Ring Quick Release

Clamp Ring Bolt (T type-quick release)

V Clamp Ring Assembly (new type)

Clamp ring bolt assembly – long, hex head

U Clamp Ring Assembly

Channel Gaskets (Thin Lip design)

V Channel Gasket TL – White Santoprene

V Channel Gasket TL – White Neoprene

V Channel Gasket TL – Electroconductive Neoprene

V Channel Gasket TL – Silicone

Other material on request

S60S81112

S48S91121

103.271

S48S01121

4110

S60S81132

S48S91131

S48S01131

103.271

S60S81124

S48S81121

S60S81152

S48S91121

S60S01105

S60R11104

S60W11104

S60U11104

S60X11104

 

ITEM

DESCRIPTION

PART N°

 

 


V Channel Gaskets (former design)

V Channel Gasket – White Santoprene

V Channel Gasket - Black Neoprene

V Channel Gasket - White Neoprene

V Channel Gasket – Silicone

V Channel Gasket – Viton

U Channel Gaskets

U Channel Gasket - Black Neoprene

U Channel Gasket - White Neoprene

U Channel Gasket – Silicone

Center Tie-Down Assembly, includes screen cushion washer, center tie-down washer, spring retainer, jam nuts and cap

Screen cushion washer – White Neoprene

Screen cushion washer – Silicone

Screen cushion washer – Viton

Screen cushion washer - EPDM

Center tie-down washer

Center tie-down jam nuts

Screen tension gasket for PF

No Tool Center Tie Down

S60R81104

S60N81104

S60W81104

S60X81104

S60V81104

S60N01103

S60W01103

S60X01103

S48S00942

S48W00921

S48X00921

S48V00921

S48E00921

S48D00922

4334

S60N00921

S48K00980E

 

ITEM

DESCRIPTION

PART N°

 

 

Tension Rings

Bottom Tension Ring (Thin Lip)

Bottom Tension Ring (Lap Ring)

Bottom tension ring (box ring)

Top tension ring

Bolt type tension ring without cloth

Smart Lock Force Wheel Parts

Top assembly (US model)

Bottom Assembly (US and HD model)

Top assembly (HD model)

Motor Weight Parts

Top motor weight assembly

Top motor weight plate

Bottom motor weight assembly

Bottom motor weight plate

Indicator washer assembly

Motor wedge (US and HD model)

Grease Gun Assembly(without grease)

Grease cartridge Castrol Longtime PD2

Grease cartridge Klueber Staburags NBU

Grease cartridge Jax Poly-Guard FG-2 FDA

Lube Hose (2 required) (from casing to base)

S60S11085

S60S01021

S60S01078

S60S01022

Consult Sweco

S60C01702

S60C01752

S60C01744

S60C00721

S60C00729

S48C00731

S48C00737

S48C00745

H48C05502B

S48K01944

S48K02020

S30K01946

00-1753

113.095

 

ITEM

DESCRIPTION

PART N°

 

 

Self Cleaning Kitwithout sliders (340 required)

Polypropylene slider - height 26 mm (for Thin Lip) ATEX appr.

Polyester slider - height 26 mm (for Thin Lip)

Polyurethane slider - height 26 mm (for Thin Lip) ATEX appr.

White nylon slider - height 26 mm (for Thin Lip)

Teflon slider - height 26 mm (for Thin Lip)

Polyethylene slider - height 24 mm (for box ring)

Polyester slider - height 24 mm (for box ring) FDA

Polyurethane slider - height 24 mm (for box ring)

White nylon slider - height 24 mm (for box ring)

White nylon slider - height 24 mm – High Temperature

Teflon Slider - height 24 mm (for box ring)

Spacer –21 mm (Thin Lip)

Spacer –19 mm (box ring)

Self cleaning perforated plate only

Self cleaning perforated plate C.D. only

Self cleaning perforated plate P.F.

"O" Ring Gasket

Self Cleaning screen kit "U" gasket

Support screen for sliders

S60S01044

S48K11130

S48K11131

S48K11119

S48K11114

S48T11015

S48K01015

S48K21031

S48K01019H

S48K01014H

S48K21018

S48T01015

S48S11047

S48S01047

S60S01046

S60S01042CD

S60S01042PF

S60H01102

H60N05023

S60S01045MG008

 

ITEM

DESCRIPTION

PART N°

 

 

Ball Tray Assembly, including 1 1/2" spacing frame, extension tie-down assembly, clamp ring assembly, black neoprene gasket, Supertaut screen assembly with SS cloth (balls not included - 80 required)

White neoprene ball

Silicone ball

Electroconductive neoprene ball

1 1/2" blank spacing frame

Ball tray tie-down assembly

S60C81599

S48K01607

S48K01606

S48U01607

S60C81602

S48S01620

 

ITEM

DESCRIPTION

PART N°

 

 

Spray System Assembly

Deublin Union

Rotary Brush Assembly

Rotary Brush Assembly (light model)

Scraper Assembly

For 60" standard units, see 48" motor price list page 77

For 60" P.F. or H.D. units

Motors 5 HP, 3 ph., 50 cy, 1450 RPM,

Standard Motors (TENV) – IP65 (DIN) – Tropicalised

- 230/400 Volt

- 500 Volt

Motors for hazardous locations - 5 HP according ATEX – Tropicalised

- 220-240/380-415 Volt – Gas Zone 1, 2 – II2G EexdIIBT4

- 220 or 240 or 380 or 415 Volt (one tension only) – Dust (including PTC) Zone 21,22 – II2D EexdIIBT135°C

Other motor voltages/frequencies/rotations available on special request

Complete assembled metal motor weight

S60S01976

102289

S60S01985

S60Srotary

S60S41775

S60E00750

S60E00706

S60E00730G

S60E00730D

LS60C00700

 

ITEM

DESCRIPTION

PART N°

 

 

Flow-Thru - spare parts

Spring spool (polyurethane) for F.T. model - insert SS

Top motor weight for F.T. model

Bottom motor weight for F.T. model including fan

Indicator Washer assembly for F.T. model

TechLube Kit Assembly for 2.5 HP motors (60”)
including lube hoses and 2 x 120 cc. Techlube Luber

Same for Italvibras motors (Klueber Staburags)

TechLube Kit Assembly for 5 HP motors (60")
including lube hoses and 1 x 120 cc + 1 x 250 cc Canisters

Techlube Luber 120 cc (Castrol)

Techlube Luber 250 cc (Castrol)

Techlube Luber 120 cc (Klueber Staburags)

S48K00220-S

H60C05412

H60C05405

H60C00745

S60K25044-F1EU

S60K25044-F5EU

S60K50084-F1EU

S48K42030-F1

S48K82031-F1

S48K42030-F5

 

72" SWECO SEPARATOR

MODEL

 

 

1800XS72C108

1800XS72C1010

1800XS72C10128

R72C80000 Flow Thru - 2 HP


Above models are equipped with one tangential discharge spout at each point of separation. Additional

discharge spouts are available if required.

Above models are available with metal cover assemblies.

Above prices include a totally enclosed 220-240/380-415 Volts 5 HP motor, 3 phase, 50 cycle, 1450 RPM (wet applications) or 950 RPM (dry applications); see page 93 extra prices for non standard motor voltages, ATEX motors.

Above prices are F.O.T. shipping point Nivelles. Add 780,00 € for seaworthy packing, or 160,00 € for plastic packing + pallet.

Above prices do not include mounted screen cloth and anti blinding accessories such as self cleaning kit, ball tray, etc...

Above prices are subject to applicable taxes.

NOTE: When stainless steel is specified, substitute "S" in place of "C" after 1800XS72 in model number.

 

 

RECOMMENDED SPARE PARTS FOR

XS72” SWECO SEPARATOR

DESCRIPTION

PART N°

 

1

V Clamp Ring Assembly

S72S61105

2

V Channel Gasket White Neoprene

S72W11104

or

2

V Channel Gasket Electroconductive Neoprene

S72U11104

1

Center Tie down Assembly

S72S00942

16

Springs only

S60S00201

1

Supertaut or Welded Screen Assy/SS Assy/SS rings/SS std. Cloth (opening smaller than 2 mm)

1

Welded Screen Assy/SS rings/SS std. Cloth (opening bigger than 2 mm - wagon wheel type screen)

1

Self Cleaning Kit with 400 white 400 nylon sliders

S72S61045

white nylon sliders

S48K11114

(other materials, see in price list of 60" units 26 mm sliders)

Metal cover assembly - CS

S72S61300+S72C61410

Metal cover assembly - SS

S72S61300+S72S61410

Flexible spout connectors:

10" ID x 12" lg - white neoprene

S72W01904

10" ID x 12" lg - silicone

S72X01904

10" ID x 12" lg - electroconductive neoprene

S72U01904

8" ID x 24" ID x 12" lg - white neoprene

S72W01905

10” ID x 1/8” – straight flex white neoprene/per meter

18027

10” ID x 12” lg – gum rubber

10-815-012

Bottom Tension Ring

S72S61021

10" Table frame SS with 6" x 10" spout

S72S62910

10" Distributing frame SS 6" x 10" spout

S72S63010

8" Spacing frame SS with 6" x 10" spout

S72S60800

Ball tray assembly

S72S61599

White Neoprene Balls (120 needed)

S48K01607

Electroconductive Neoprene Balls (120 needed)

S48U01607

XS72” Spare parts cannot be mounted on US72” Separators


RECOMMENDED SPARE PARTS FOR

US72” SWEDO SEPARATOR

DESCRIPTION

PART N°

 

1

V Clamp Ring Assembly

S72S81102

2

V Channel Gaskets White Neoprene

S72W81104

1

Center Tie down Assembly

S72S00942

24

Springs only

S60S00201

1

Supertaut or Welded Screen Assy/SS rings/SS std. Cloth

Add for back-up

1

Self Cleaning Kit with 350 white nylon sliders

S72S01045

White nylon sliders

S72K01017

Polyester Sliders

S72K01031

Metal cover assembly - CS

S72C81400

Metal cover assembly - SS

S72S81400

Flexible spout connectors:

10" ID x 12" lg - white neoprene

S72W01904

10" ID x 12" lg - silicone

S72X01904

8" ID x 24" ID x 12" lg - white neoprene

S72W01905

US72” Spare parts cannot be mounted on XS72” Separators

MISCELLANEOUS

Extras for SS316 + 30 % on wetted parts (take assembly when existing)

Extra for Chocolate separator + 15 % on machine price with 3 foot and no clamp ring

DESCRIPTION

PART N°

Clamp band for flexible spout connector:

9507

3 1/4"SS

9506

4" SS

9504

6" SS

9501

8" SS

9502

10" SS

9503

12" SS

Thru spout (all sep. Units)

-

-

Vent Pipe on spout

-

-

Extended spout (max 6")

-

-

Sliding gate (all sep. units SS)

-

-

Baffle for spacing frame or distributing frame

-

-

for 18", 24" and 30" (bolted)

-

-

Baffle for spacing frame or distributing frame

-

-

for 40", 48", 60" and 72" (bolted)

-

-

Baffle for table frame for 18", 24" and 30" (welded)

-

-

Baffle for table frame for 40", 48", 60" and 72" (welded)

-

-

Earth connection assembly, each PN 18810

18810

-

Nylon Plug 3" PN18702

18702

-

Nylon Plug 6" PN 18703

18703

-

Mini spout 3" - 4"

-

-

White nylon wheel (diam.80) and SS brake, per unit

18669

-

White nylon wheel (diam.100) and SS brake, per unit

18712

-

On/Off switch for 18"/24"/30" 380 Volt

1011550

-

On/Off switch for 18"/24"/30" 220 Volt

1011550

-

On/Off switch for 48"/60" 380 Volt

1011552

-

On/Off switch for 48"/60" 220 Volt

1011553

-

Door safety switch

1011549

-

Lifting lug, set of 3 per frame or cover

-

-

Base extension adder: 50% of base weldment price,

-

-

max extension 50 cm, for extra contact Sweco

-

-

Screen grounding clip P60S81440

-

-

Spring Grounding clip

S48S00443

-

 

CENTER TIE-DOWN STUDS

Model

Type of Frame

CTD Stud

Length

Part N°

 

S18

3" table frame

M10 SS

107 mm

S18S00915

S18

5" table frame

M10 SS

162 mm

S18S00916

S18

3" distributing frame

M10 SS

116 mm

S18S00914

S18

5" distributing frame

M10 SS

132 mm

S18S00913

S18

3" table frame with ball tray

M10 SS

147 mm

S18S00912

S18

5" table frame with ball tray

M10 SS

190 mm

S18S00917

S18

3" distr. frame with ball tray

M10 SS

147 mm

S18S00918

S18

5" distr. frame with ball tray

M10 SS

190 mm

S18S00919

S24

4" table frame

M10 SS

133 mm

S24S00914

S24

4" distributing frame

M10 SS

116 mm

S24S00913

S24

4" table frame with ball tray

M10 SS

155 mm

S24S00915

S24

4" distr. frame with ball tray

M10 SS

155 mm

S24S00916

S30

6" table frame

M10 SS

158 mm

S30S00912

S30

6" distributing frame

M10 SS

142 mm

S30S00915

S30

6" table frame with ball tray

M10 SS

173 mm

S30S00913

S30

6" distr. frame with ball tray

M10 SS

155 mm

S30S00916

S48

6" table frame

M16 SS

182 mm

S48S00915

S48

8" table frame

M16 SS

228 mm

S48S00916

S48

6" distributing frame

M16 SS

183 mm

S48S00917

S48

8" distributing frame

M16 SS

186 mm

S48S00918

S48

6" table frame with ball tray

M16 SS

220 mm

S48S00919

S48

8" table frame with ball tray

M16 SS

277 mm

S48S00912

S48

6" distr. frame with ball tray

M16 SS

220 mm

S48S00911

S48

8" distr. frame with ball tray

M16 SS

220 mm

S48S00910

S60

8" table frame

M16 SS

234 mm

S60S00913

S60

10" table frame

M16 SS

263 mm

S60S00914

S60

8" distributing frame

M16 SS

202 mm

S60S00915

S60

10" distributing frame

M16 SS

253 mm

S60S00916

S60

8" table frame with ball tray

M16 SS

233 mm

S60S00917

S60

10" table frame with ball tray

M16 SS

242 mm

S60S00918

S60

8" distr. frame with ball tray

M16 SS

214 mm

S60S00919

S60

10" distr. frame with ball tray

M16 SS

293 mm

S60S00920


INSPECTION OPENING COVERS - SEPARATORS

PART N°

SIZE AND DESCRIPTION

 

 

S48W00823

S48W00832

S48W00827

S48W00828

S48W00829

S48W00831

3” inspection cover white nitrile

4" inspection cover white nitrile

6" inspection cover white nitrile

8" inspection cover white nitrile

10" inspection cover white nitrile

12" inspection cover white nitrile

S48X00832-01

S48X00827

S48X00828

S48X00829

4” inspection cover silicone (translucent)

6” inspection cover silicone

8” inspection cover silicone

10” inspection cover silicone

S48E00827

S48E00828

6” inspection cover EPDM black

8” inspection cover EPDM black

CIP UNITS (EXTRA PRICES) – WHEY SCREENING

Those prices should be added to unit price

This includes a bazooka for feeding and washing, and spray spheres on the table frame or distributing frame when existing

There is no extra for SS base or table included in this price (to be added separately)

 

Sweco Gyramax Pricing € 2008

Gyramax Model and Description

Decks

Width

Length

 


 


GSM-3X6 Single Deck (Mini*)

1

3

6

GSM-3X6 Double Deck (Mini*)

2

3

6

GSM-3X8 Single Deck (Mini*)

1

3

8

GSM-3X8 Double Deck (Mini*)

2

3

8

GST-3X8 Triple Deck

3

3

8

GSS-3X10 Single Deck

1

3

10

GSD-3X10 Double Deck

2

3

10

GST-3X10 Triple Deck

3

3

10

GSS-4X6 Single Deck

1

4

6

GSD-4X6 Double Deck

2

4

6

GST-4X6 Triple Deck

3

4

6

GSS-4X8 Single Deck

1

4

8

GSD-4X8 Double Deck

2

4

8

GST-4X8 Triple Deck

3

4

8

GSS-4X10 Single Deck

1

4

10

GSD-4X10 Double Deck

2

4

10

GST-4X10 Triple Deck

3

4

10

GSS-4X12 Single Deck

1

4

12

GSD-4X12 Double Deck

2

4

12

GST-4X12 Triple Deck

3

4

12

GSS-5X8 Single Deck

1

5

8

GSD-5X8 Double Deck

2

5

8

GST-5X8 Triple Deck

3

5

8

GSS-5X10 Single Deck

1

5

10

GSD-5X10 Double Deck

2

5

10

GST-5X10 Triple Deck

3

5

10

GSS-5X12 Single Deck

1

5

12

GSD-5X12 Double Deck

2

5

12

GST-5X12 Triple Deck

3

5

12

GSS-6X10 Single Deck

1

6

10

GSD-6X10 Double Deck

2

6

10

GST-6X10 Triple Deck

3

6

10

GSS-6X12 Single Deck

1

6

12

GSD-6X12 Double Deck

2

6

12

GST-6X12 Triple Deck

3

6

12

For two screen decks operating in parallel, adjust pricing as follows:

1. Take the price of the appropriate 2-deck machine and multiply by 1.4

2. For AR or stainless units, add 1380 EUR then multiply 450 EUR by the width of the unit in feet and add that to the price, as well.

For four deck machine, take price of triple deck and multiply by 1.15

Unit prices are not including screen prices.

Agents or Resellers: your level of commission/discount is limited to 12% on the above Equipment if sold at list price.

MOTOR CREDITS

1.MOTOR CREDITS

1/4 HP all

 

1/3 HP all

 

1/2 HP all

 

2.5HP all

 

5 HP all

 

These above amounts will be credited for old motors returned to Sweco when a new motor will

be purchased.

For all resellers, getting a discount on the price of a new motor, the same discount will apply on the credit note.

The motors should be sent to Sweco freight prepaid.

If a motor is sent freight collect, we will deduct this amount of the credit note.

Note 1 : The warranty shall not apply to any motor which shall have been repaired or altered outside of SWECO's factory without prior written approval by SWECO, or which has been subject to misuse, negligence or accidents. Every motor that has been opened loses immediately its waranty.

Note 2: Beyond the warranty period, we strongly recommend to our customers, instead of repairing or altering the motors, to take benefit of our motor credit and buy a brand new motor

 

2.PANEL EXCHANGE CREDIT AMOUNTS (freight prepaid)

12"

(5" x 16")

 

12"

(5" x 28")

 

30"

(10" x 10")

 

30"

(10" x 20")

 




VIBRO-ENERGY GRINDING MILLS

Description

 

 

DM-1L with standard motor 1/3 HP

DM-4L with standard motor 2,5 HP

DM-10L with standard motor 5 HP

DM-20-L (Grease Lube) with standard motor 10 HP

M-18L with standard motor, 1/4 HP

M-18S with standard motor, 1/4 HP

M-18S with standard motor, 1/4 HP, SS jacket

Series grind inlet for M-18

M-18-5 less chamber with standard motor, 1/4 HP

M-18-5 chamber each : fabricated stainless steel, with SS cap

Polyurethane (not FDA)

Ceramic

M-45L with std. 5 HP motor, incl. Series grind inlet

M-60L (Grease Lube) with std. 10 HP motor,

incl. series grind inlet

Notes :

1. for other models, or FDA linings, please contact SWECO EUROPE S.A.

2. for ATEX motors, please see separators price list, or consult Sweco

 

 

GRINDING MEDIA

Type of Media

Size

PN

High density High alumina

Zirconium Oxide (Radius Cylinders)

100-900 lbs

1000-19900 lbs

>20000 lbs

50-950 lbs

1000-2950 lbs

>3000 lbs

RODS

1/2" x 1/2"

17-002

 

 

 

 

3/8" x 3/8"

-

N/A

N/A

on

On

13/16" x13/16"

17-007

 

 

on request

Request

Request

on request

1 1/4" x 1 1/4"

-

N/A

N/A

1/4" x 1/4"

17-001

 

 

N/A

1"

N/A

N/A

ISO BALLS

1"

17-012

 

 

Comparative Properties :

1-1/2"

17-011

 

 

Alumina grade P-3662; AL 203 - 85 - 90°;

2"

17-004

 

 

on request

Specific gravity : apr. 3.4

2 1/2"

N/A

N/A

Hardness : apr. 9 Mohs Scale

3"

N/A

N/A

Water absorption : none

1-1/4"

17-024

 

 

Porosity : gas tight; Color : off White

SATELLITE

1/4"

17-018

 

 

BALLS

1/2"

17-015

 

 

3/4"

17-036

 

 

on request

1"

17-010

 

 

1 1/4"

17-005

 

 

 

Prices are per lbs

Standard Packing of 100 lbs. = minimum quantity

(*) Flat end cylinders, standard packing of 50 lbs

 

 

SWECO CENTRIFUGAL SIFTERS

MODEL

1) STANDARD GRAVITY SIFTERS

2) PN. IN-LINE SIFTERS (VACUUM & BLOW-THRU)

DATA SHEET

Surface/

Scale

TECHNICAL SPEC REF

CS PRICE

316 SS PRICE

SPECIAL COMMENTS

DATA SHEET

SHORT FORM QUOTE REF

TECHNICAL SPEC REF

CS PRICE

316 SS PRICE

SPECIAL COMMENTS

MINISIFTER

DS03-416

0,04m2,

0,1 scale

TBA

N/A

ALUMINUM

N/A

N/A

N/A

LAB SIFTER

DS490

0,04 m2,

0,1 scale

TBA

SS Cantilever Design, fixed speed

N/A

N/A

N/A

K300

DS478

0,11 m2,

0,3 scale

TBA

TBA

SFQ.S300BT SW

TBA

K650S

DS474

0,5 m2,

1 scale

TBA

TBA

SFQ.S500BT SW

TBA

K650EZ

DS538

0,5 m2,

1 scale

TBA

TBA

SFQ.S650 BT SW

TBA

K800

DS492

0,7 m2,

1,7 scale

TBA

TBA

SFQ.S800 BT SW

TBA

K1350

DS317

TBA

 

TBA

N/A

TBA

 

NOTES:

1. All Prices are FOB Factory

2. All orders are subject to confirmation of application prior to acceptance

3. All carbon steel sifters have epoxy coated finish as standard

4. All stainless steel sifters are bead blast finish as standard

5. All orders are subject to Sweco terms and conditions

6. All models are of conventional design featuring H.D. oversize end bearing except lab sifter which is of cantilever shaft design

7. All in-line sifters are fitted with bolted body door, std linlet & outlet flanges and nylon/SS mesh as standard. See optionpage for inlet & outlet STP pipe, wedge wire screen, PVR, hinged & interlocked body door and oversize end canister as extras

 

LOW PROFILE SEPARATORS

MODEL

 


 


LP18S53 (2 x 0,15 HP)

 

 

 

LP24S64 (2 x 0,34 HP)

 

 

 

LP30S66 (2 x 0,34 HP)

 

 

 

LP40S66 (2 x 0,67 HP)

 

 

 

LP48S88 (2 x 0,67 HP)

 

 

 

LP60S88 (2 x 0,67 HP)

 

 

 

LP72S178 (2 x 0,67 HP)

 

 

 

 

Above models are equipped with one tangential standard discharge spout on the spacing frane

Standard machines are with carbon steel base and stainless frames

Above models are available with plastic, plexiglass or metal cover assemblies.

Above pricesincludetwo totally enclosed standard motors, 3 phase, 50 cycle, 1450 RPM, standard IP 55 (DIN). ATEX motors are available on requests.

Voltages are between 220 and 415 volts.

Above prices do not include mounted screen cloth and anti blinding accessories such as self cleaning kit, ball tray, etc.

MOTORS FOR LOW PROFILE SEPARATORS

Unit

Model
Kw
Part N°

 

LP18

BL 05-2/4

0,195

L18I00750

LP24

BL15-3/4

0,25

L24I00750

LP30

BL20-5/4

0,25

L30I00750

LP40

BL24-7.5/4

0,5

L40I00750

LP48

BL24-11/4

0,5

L48I00750

LP60

BL24-11/4

0,5

L48I00750

 

ATEX motors, D or G on request. Flange for standard and ATEX motors are different.

All motors listed have normal 220-240/380-415 V tension


SWECO SONO-ENERGY SYSTEM

The SWECO SONO-ENERGY SYSTEM consists of the following removable components :

  • one Generator Box ( A )
  • one Utrasonic Removable Transducer ( B )
  • one Ultrasonic Screening Tension Ring (resonator) ( C )

including mesh ( D )

  • installation in a Sweco separator (E)

 

DESCRIPTION

PART N°

 

 

A

Ultrasonic Generator

T48K00210

B

Ultrasonic Transducer

Idem

C

Resonator Assembly, without transducer, without mesh

diam. 18"

diam. 24"

diam. 30"

S30S11085UST

diam. 40"

S40S11085UST

diam. 48"

S48S11085UST

diam. 60"

S60S11085UST

D

See Next Page


E

Installation of above parts (Aà C) in a Sweco separator

Installation/System Adder

 

diam. 18"

diam. 24"

diam. 30"

diam. 40"

diam. 48"

diam. 60"

 

- per deck

- contact Sweco for multiple deck

SWECO SONO-ENERGY SYTEM

The SWECO SONO-ENERGY SYSTEM consists of the followingpermanentcomponents :

- one Generator Box ( A )

- one Ultrasonic Screening Tension Ring (resonator) ( B )

including mesh ( C )

- installation in a Sweco separator (D)

DESCRIPTION

PART N°

 

 

A

Ultrasonic Generator

T48K00210

B

Resonator Assembly, with transducer, without mesh

diam. 18"

diam. 24"

diam. 30"

diam. 40"

diam. 48"

diam. 60"

For ATEX version, add 30 % on above price

C

See Page Before


D

Installation of above parts (Aà C) in a Sweco separator

Installation/System Adder

 

diam. 18"

diam. 24"

diam. 30"

diam. 40"

diam. 48"

diam. 60"

 

- per deck

- contact Sweco for multiple deck, ATEX specifications if needed

QUICK CHANGE TYPE II (QC) SEPARATOR

MODEL

 

 

QC30S66

QC30S686

QC30S6886

QC40S66 (1/2 HP)

QC40S686 (2.5 HP)

QC40S6886 (2.5 HP)

QC40S86 (1/2 HP)

QC40S886 (2.5 HP)

QC40S8886 (2.5 HP)

QC48S66

QC48S686

QC48S6886

QC48S86

QC48S886

QC48S8886

QC60S88

QC60S888

QC60S8888

QC72S108

QC72S10128

Above units include clamp rings to secure a better sealing and to allow more flexible spout positioning.

Distributing frames have always to be 8” high.

If a higher frame is requested, add difference with standard frame from price book.

Spring protection and skirt included.

Above models are available with plastic, plexiglass or metal cover assemblies.

Above prices :

- include a totally enclosed standard motor, 3 phase, 50 cycle, 1450 rpm, standard IP 55 (see standard separator for power).

ATEX motors are available on request, see extra in standard machines price list

- for packing, see page 8

- do not include mounted screen cloth and anti blinding accessories such as self cleaning kits, etc.

- are subject to applicable taxes.

 


SPARE PARTS LIST FOR SWECO QUICK CHANGE UNIT

Part N°
Unit Price

1

Actuator

108438

2

Airbag Cannister Male *

S60P50024

2

Airbag Cannister Female *

S60P50022

 

· mounted with 6 threaded rods M10

NON VIBRATING QUICK CHANGE

Available on all models as from 30”. Use hydraulic lifters mounted on the base, hand operated.

Can be used for retrofit of existing machines. Can be mounted on top frame or metal cover – to be specified with the order -

Pricing : SS

CS

SWECO AVALANCHE SEPARATOR

48” 304SS Avalanche Frame Kit

includes : Frame w/inspection opening

40” Clamp Band

40” Std Center Tie Down Kit

48” custom Center Tie Down

Screens Required (Priced Separately) :

1 Std. 40” top screen

1 Avalanche 48” bottom screen w/8” center hole


60” 304SS Avalanche Frame Kit

includes : Frame w/inspection opening

48” Clamp Band

48” Std Center Tie Down Kit

60” custom Center Tie Down

Screens Required (Priced Separately) :

1 Std. 48” top screen

1 Avalanche 60” bottom screen w/10” center hole